Because of steadily increasing energy prices we put the last years special attention on development and
production of innovative lighting technology. Therefore we can offer you lighting systems in a high,
consistent quality and durability – made in germany – with the latest LED-technology, low heat
generation and high cost savings.
The Low Power T8 LED tube is a light fi tting that uses the latest LED technology. From now on, you will be able to implement your planned lighting arrangements in an environmentally friendly manner with a high degree of energy effi ciency thanks to this product’s excellent reliability and long service life. With the Low Power T8 LED tube, you will be able to replace the conventional fl uorescent tubes that you have used up to now with an energy-effi cient light fi tting in a simple manner. When using your new Low Power T8 LED tube, please observe the following instructions and other applicable installation regulations to ensure a long service life and safe operation for this product.
The Low Power T8 LED tube is available in various models. An LED driver is responsible for the power supply. In contrast with conventional fluorescent tubes, there is no delay in switching on these lights. Brightness is thus available immediately when the unit is switched on. The start-up time that is familiar from conventional fluorescent tubes is avoided here, meaning that instantaneous lighting is provided. The light emitted is flicker-free and is thus also suitable for people who are sensitive to conventional fluorescent tubes. The Low Power T8 LED tube is not affected by short switching intervals.
The High Power T8 LED tube is a lighting system that uses the most recent LED technology. Due to its high reliability and durability you can realize from now on lighting ideas environmentally friendly and highly efficient. With High Power T8 LED tubes you can replace old conventional fluorescent tubes easy and energy-efficient. For durable and save running please pay attention to the following advices for using the new High Power T8 LED tubes and to the instructions for installation.
Different models of the High Power T8 LED tube are available. The power supply is driven by an external LED driver (LED Power Supply). There is no switch-on delay as in conventional fluorescent tubes. Therefor brightness is available right after switch-on. As a result the usual starting time of conventional fluorescent tubes is avoided and instant full illumination is reached. The radiated light is flicker-free and therefor suitable even for persons that normally react sensitive to light of conventional fluorescent tubes. The High Power T8 LED tube is insensitive to short switching intervals.
Product information sheet High Power T8 LED
Productsheet_HPT8LED_eng.pdf (1,4 MB)
Manual High Power T8 LED
OperationManual_HPLEDTube_eng.pdf (763,5 kB)
TÜV Certificate
The LED-Waterproof lights are suitable for indoor and outdoor applications in industrial areas, sports fields, workshops, garages, agricultural buildings and halls. The LED-Waterproof light contains LED-RE lamps and associated Power LED power supply. The components are replaceable. The LED-Waterproof light is equipped with flush-mounted clips for attaching a diffusor (cover). The polycarbonate housing is impact and heat resistant. The clips are made of metal.
A polyurethane seal integrated into the LED-Waterproof light ensures IP 66 protection. The LED-Waterproof light is resistant to dust, moisture and spray water. The cover has a shock resistance class of IK 08, which means that it is resistant to ball impacts. On request, the steel hooks can also be replaced by steel eyebolts.
The electronic series switch ES 1000W / AF8 enables to switch separately all kind of lamps for example: ceiling and wall lamps, multi-lamp luminaries, outside lighting etc.. … and all this by using the already existing switch contact / circuit breaker.
The ES 1000W / AF8 is only meant for lighting purposes. It can be operated in all conventional circuit varieties as disconnection, two-way connection, cross connection and connections with surge relay. In dimmed circuits the use of the device is limited. With the ES 1000W / AF8 those circuitry are easily extended to the function of a series switch. Therefor it's possible to operate independently two lamps. Otherwise this could only be realized with a conventional series switch what would also mean a lot more effort.
With the ES 1000W / AF8 the existing installation won't be changed. Only the added lamp has to be interconnected. Due to the minimal dimension the ES 1000W / AF8 can be build into (with spring-clamp technique) for example branch boxes, lamps, canopies etc. The electronic series switch ES 1000W / AF8 can be used for energy saving. When installed outside attention has to be paid to the appropriate degree of protection for example by using a branch box in humid locations.